| Manufacturer |
Type |
Size |
Description |
Qty |
Photos |
| Hardinge |
Ball |
30" Diameter |
|
|
N/A |
| Allis-Chalmers |
Vibrating Ball Mill |
3040 |
Vibrating Ball mill.
40 Hp Electric Motor. Mounted on Stand. |
1 |
N/A |
| Northwest |
Ball |
3' x 3' |
With
15 HP motor/ Syntron feeder. On steel skid . Unused |
1 |
Photo |
| Denver |
Ball |
4' x 4' |
25 HP |
1 |
N/A |
| Denver |
Ball |
4' x 8' |
Steel Lined |
1 |
N/A |
| |
Ball |
4' x 9' |
Steel Lined |
1 |
N/A |
| Allis-Chalmers |
Ball |
4' x 10' |
Damaged Head |
1 |
N/A |
| Denver |
5' |
Parts |
Ring Gear. 136-tooth, 6"
face, 87-3/4" OD. 50-1/2" ID. 24 bolt holes. |
1 |
N/A |
| Denver |
5' |
Parts |
Pinion. 25-tooth. 6" face.
17" OD. Mounted on 4-7/8" Diam Shaft. New. |
1 |
N/A |
| Marcy |
Ball |
5' x 9' |
|
1 |
N/A |
| Hardinge |
Ball |
5' x 22" |
Steel Liners, very good condition,
with motor & Drive. |
1 |
N/A |
| Denver |
Ball |
6' X 6' |
Rubber Liners/Scoop Feed/ Less
motor/ 70% liners/Good Gears. |
1 |
N/A |
| Hardinge |
Ball |
6' X 36" |
Parts. Call for list. |
1 |
N/A |
| Hardinge |
Pebble |
6' x48 " |
Stone Lined |
1 |
N/A |
| Hardinge |
Ball |
6' x 48" |
Steel Liners. Feed Screw. Fairly
new mill |
1 |
N/A |
| Denver |
Ball |
7' x 6' |
Steel Liners.
Almost New. |
1 |
Photo |
| Marcy |
Ball |
8' x 7' |
Almost new liners and gears,
Extra Liners. 250 HP Motor. |
1 |
Photo |
| Hardinge |
Ball |
8' x 36" |
Conical Mill w/steel liners/grate
discharge/Falk Reducer/motor/2300-volt |
1 |
N/A |
| Hardinge |
Ball |
8' x 48" |
Conical Mill w/Steel liners/grate
discharge |
1 |
N/A |
| Traylor |
Ball |
8' x 9' |
Wet Mill / Rubber Lined |
1 |
Photo |
| Allis-Chalmers |
Ball |
9' x 12' |
Rubber Lined. New in 1969/ 500 HP
300 RPM 3/60/2300V Motor |
3 |
Photo |
| Hardinge |
Ball |
9' x 12' |
|
2 |
N/A |
| Hardinge |
Pebble |
10' x 72" |
Conical Mill.
Stone Lined |
1 |
N/A |
| Allis-Chalmers |
Ball |
12' x 18' |
900 HP. Rubberlined, Lubrication
System. 30-Tons grinding media |
1 |
N/A |
| Allis-Chalmers |
Ball |
13' x 16' |
Finish Mills. Grate Discharge.
1500 HP/2300-volts. |
2 |
N/A |
| Allis-Chalmers |
Finish |
13' x 20' |
2000
HP Finish Mill. |
1 |
N/A |
| Hardinge |
Ball |
15-1/2' x 24' |
Rubber
Liners. Open Discharge. 3000 HP/4160-volts. Synchronous Motor. |
1 |
N/A |
| Allis-Chalmers |
Ball |
7' X 8' |
Parts. Ring Gear for 8' to 10'
long mill. Unused. |
1 |
N/A |
| Allis-Chalmers |
Ball |
7' X 8' |
Wave Type Shell Liners. Unused. |
|
N/A |
